Kinetic Die Casting Company makes Die Casting Aerospace Parts 2021 –

Kinetic Die Casting Company makes several types of Die Casting Aerospace Parts. These aerospace die casting parts are used for many types of purposes. Some of these parts are used on many types of aircraft, such as: airplanes, jet planes or helicopters.

Aircraft manufacturers typically specify aluminum die casting to make the aerospace parts because aluminum is lightweight and inexpensive as well as very strong.

• Lightweight – Aluminum weighs only .098 pounds each cubic inch of material as compared to zinc which weighs about 2.44 pounds each cubic Inch.
• Inexpensive – Aluminum is the third most common element on earth, so it is more available than other materials. Aluminum is used in over 80% of all die castings produced in the world.
• Strong – Aluminum parts can be geometrically designed to be stronger than steel. Look up “aluminum is stronger than steel” on Google to see the results.

These aerospace parts range from: airplane engine piston heads, airplane distributor cap housings, fuel system parts, detention ring parts, cargo loading housings, lighting fixture parts, electronic enclosures, electronic housings, motor housings and various other aluminum die casting parts.

The companies that trust us to purchase their die casting parts from Kinetic Die Casting Company are many.

Here are a few of the aircraft and aerospace companies that we can name:
• Robinson Helicopter
• Ancra International
• Whittaker Controls
• AAR Cargo Systems
• Boeing Aerospace
• Barry Controls
• Meggitt Aerospace
• Parker Hannifin Aerospace Corporation (Parker FSD)
• Circle Seal Aerospace
• Kelly Aerospace
• Curtiss Wright
• Honeywell
• United Technologies Aerospace

Low Quantities.

Many of these companies order lower quantities. One of the companies listed here will order less than 50 parts at a time. Many of these companies order 250 parts or less. Kinetic Die casting will accept any purchase order quantity.

Contact Kinetic Die Casting Company when you need any of the following: Low Quantities, Great Quality, Fast Delivery.

Kinetic Die Casting Company
6918 Beck Avenue
North Hollywood, CA 91605
E-mail sales@kineticdc.com

Aerospace Die Castings and Aircraft Die Castings
Die Casting Aerospace Parts
Airplane Die Casting Parts
Die Casting Aerospace Part Pictures
Airplane Die Casting Part Pictures

Kinetic Die Casting Company 6918 Beck Avenue, North Hollywood, California 91605 USA
E-mail sales@kineticdc.com Toll Free: (800) 524-8083 Local: (818) 982-9200 Fax: (818) 982-0877
Die Casting Aerospace Parts Prices

Original Post: https://www.kineticdiecasting.com/kdc/kinetic-die-casting-company-makes-die-casting-aerospace-parts-2021/

Kinetic Die Casting Company 6918 Beck Avenue North Hollywood California 818-982-9200

No longer interested email from Kinetic Die Casting Blog?. Please email sales@kineticdc.com to unsubscribe

The Advantages of Cast Aluminum Parts for Music over Plastic Parts in 2021 –

The Advantages of Cast Aluminum Parts for Music over Plastic Parts. For serious musicians and the musical professionals in the music industry, having instruments that last longer, that sound extraordinarily good, and that are strong and sturdy is very important. Guitar amplifiers, for example, should be able to produce sound as clearly and stable as they can, which is why many manufacturers of amplifiers are now going for aluminum casting for parts. Aluminum castings are normally sturdier and are able to produce sound better than plastic, plus it is easier to shape and quick to produce in numbers. Though plastic is cheaper when it comes to production costs, aluminum casting parts for music last longer, can be shaped into all kinds of complex shapes to make it fit and function better, and it isn’t expensive as well.

But because sound and how guitar amplifiers produce the kind of music certain musicians are after are some of the top priorities when choosing guitar amps, there is still the want for vacuum tube amps despite their heavy weight and constant tuning and annual maintenance. Guitarists for genres such as the blues and rock prefer the sound produced by these vacuum tube guitar amps, but thanks to the advancements in technology even today’s guitar amplifiers can emulate sound that of classic guitars almost perfectly.

Kinetic Die Casting manufactures aluminum and zinc die casting parts. Samples of KDC’s work include die cast speaker parts, aluminum tile plates, and other die cast metal parts. If you would like to have a quote please visit our website: Kinetic Die Casting Company

Kinetic Die Casting Company 6918 Beck Avenue, North Hollywood, California 91605, United States of America
E-mail sales@kineticdc.com USA Toll Free: (800) 524-8083 Local: (818) 982-9200 Fax: (818) 982-0877
To get prices for Die Casting Tooling Molds or Parts: RFQ Die Casting Part Prices
“The Parts We Make Today, We Ship Today”
Kinetic Die Casting Company makes:
FAQ Die Casting Questions and Answers
Kinetic Die Casting Capabilities
Kinetic Die Casting Jobs
Roof Tile Molds Company

Original Post: https://www.kineticdiecasting.com/kdc/the-advantages-of-cast-aluminum-parts-for-music-over-plastic-parts-in-2021/

Kinetic Die Casting Company 6918 Beck Avenue North Hollywood California 818-982-9200

No longer interested email from Kinetic Die Casting Blog?. Please email sales@kineticdc.com to unsubscribe

Happy Mother’s Day 2021 –

Today, Sunday, May 9th is Mothers Day 2021. Why do we celebrate Mothers Day? For “the person who has done more for you than anyone in the world” – Anna Jarvis. The US holiday of Mother’s Day was first celebrated in 1908, when Anna Jarvis held a memorial for her mother at Saint Andrew’s Methodist Church in Grafton, West Virginia. Saint Andrew’s Methodist Church has an International Mother’s Day Shrine now to remember. Her campaign to make “Mother’s Day” a recognized holiday in the United States began in 1905, the year her mother, Ann Reeves Jarvis, died. The mother, Ann Jarvis, had been a peace activist who cared for wounded soldiers on both sides of the American Civil War. Ann created Mother’s Day Work Clubs to address public health issues. Anna Jarvis wanted to honor her mother by continuing the work she started and to set aside a day to honor all mothers.

Happy Mothers Day

Traditional gifts to Mothers include: flowers, candy, a dinner at a nice restaurant or a spa treatment. Whatever you decide to do for your mother, remember to do something.

(homemade almond roca candy)

Permalink: https://www.kineticdiecasting.com/kdc/happy-mothers-day-2021/

Thank you for purchasing aluminum and zinc parts from KDC:
Kinetic Die Casting Company 6918 Beck Avenue, North Hollywood, California 91605 USA
E-mail sales@kineticdc.com
Toll Free: (800) 524-8083
Local: (818) 982-9200

Kineticdc makes:
Aluminum Heat Sinks
Automotive Die Casting Parts
Airplane Die Casting Parts
Light Fixture Die Casting Parts
Consumer Products Aluminum Parts
Aerospace Die Casting Parts
Military Die Casting Parts
Die Casting Tooling

Holiday at Kinetic Die Casting Company
Die Casting Company
Kinetic Die Casting Company Jobs
American Die Casting Company
Die Casting Company Information

Kinetic Die Casting Company 6918 Beck Avenue, North Hollywood, California 91605 USA
E-mail sales@kineticdc.com
Toll Free: (800) 524-8083
Local: (818) 982-9200
Die Casting Parts Prices

Original Post: https://www.kineticdiecasting.com/kdc/happy-mothers-day-2021/

Kinetic Die Casting Company 6918 Beck Avenue North Hollywood California 818-982-9200

No longer interested email from Kinetic Die Casting Blog?. Please email sales@kineticdc.com to unsubscribe

Tooling Die Casting Tooling Used for Aluminum Die Casting 2021 –

Tooling Used For Aluminum Die Casting. Tooling is a major requirement in aluminum die casting. During the process of casting, the softened molten metal is injected through custom tooling. The die is then cut into two halves. There is the cover metal die which is mounted on the stationary based platen and the ejector type die, which is actually mounted to a movable platen. Such a design provides the die with the ability to close or open along parting lines. Once the hole is closed, the two die halves will form a type of internal cavity which is filled with hot molten metal in order to form its final casting.

The cavity is formed through 2 inserts. The two inserts are the core and cavity inserts. They are inserted into the cover or ejector die. The cover die provides movement or flow of the molten metal through the injection area. Through a small opening and the cavity, the molten metal will be able to move easily. The ejector die also includes a support plate and a small enclosure called the ejector box, which is well mounted onto the area of the platen. When the clamping separates the 2 halves of the die, the clamping bar will be pushing the ejector plate into the ejector box. The clamps will then push the pins of the ejector to the molded part. The added pressure will eject the clamp from its core insert. In order to perfect the process, multiple cavity die is often utilized and in this type of process the two halves of the die will form several types of identical cavities.

Like
Kinetic Die Casting Company on Facebook

This is the blog on the Kinetic Die Casting Company web site. We also produce Tooling Molds for Die Castings. Look at this website page for more details: www.kineticdiecasting.com/tooling_die_casting.html. Contact Kinetic Die Casting Company at 818-982-9200 or email us at sales@kineticdc.com. Use this webpage to request “die casting part prices” www.kineticdiecasting.com/replyform.html

Die Casting Tooling and Die Casting Molds
Die Casting Tooling Information
Tooling Used in Die Casting
Frequently Asked Die Casting Questions
Die Casting Tile Molds

Kinetic Die Casting Company 6918 Beck Avenue, North Hollywood, California 91605 USA
E-mail sales@kineticdc.com Toll Free: (800) 524-8083 Local: (818) 982-9200
Die Casting Tooling Prices

Original Post: https://www.kineticdiecasting.com/kdc/tooling-die-casting-tooling-used-for-aluminum-die-casting-2021/

Kinetic Die Casting Company 6918 Beck Avenue North Hollywood California 818-982-9200

No longer interested email from Kinetic Die Casting Blog?. Please email sales@kineticdc.com to unsubscribe

Why You Should Consider New Aluminum Lighting Fixtures in 2021 –

Why You Should Consider New Aluminum Lighting Fixture Parts. For some time, lighting fixtures for various applications are manufactured with great labor. The parts are carefully welded and shaped in order to make a good fit for the lighting source. Because of the seemingly complicated works that takes place in the manufacture of steel lighting parts, the cost of such pieces is relatively expensive. Those who cannot avail of the steel lighting parts are now considering the use of new aluminum lighting fixture parts for their products.

Aluminum is a kind of metal that is very pliable. It can easily conform to the desired shape and size of the manufacturer. However, even though it is malleable, it is still a durable material for lighting purposes. It is relatively more resistant to rusts and other harmful elements. Aside from this, aluminum also provides a good heating facility for the lighting fixtures that are used for thermal applications. Unlike with plastic, it does not “burn” with constant use.

Aluminum lighting fixture parts are available in various sizes and shapes. You can instantly acquire parts that are suitable for your lighting fixtures. Parts that are manufactured from cast aluminum are considerably lighter than steel. Because of this, you can have the pieces assembled and installed without having any troubles with them.

To get a price for aluminum die casting parts or die casting tooling, call toll free 800-524-8083 and ask for sales. Or email us at E-mail sales@kineticdc.com for a fast response on a price quote.

Kinetic Die Casting manufactures products like aluminum hardware, and aluminum boxes. If you would like more information on Kinetic Die Casting, please visit our website:Kinetic Die Casting Company

Aluminum Lighting Fixtures

Lighting Die Casting Parts
Die Casting Lighting Parts
Diecasting Parts
Die Casting Lighting Part Pictures
Die Casting Lighting Fixtures

Kinetic Die Casting Company 6918 Beck Avenue, North Hollywood, California 91605 USA
E-mail sales@kineticdc.com Toll Free: (800) 524-8083 Local: (818) 982-9200 Fax: (818) 982-0877
Die Casting Lighting Parts Prices

Original Post: https://www.kineticdiecasting.com/kdc/why-you-should-consider-new-aluminum-lighting-fixtures-in-2021/

Kinetic Die Casting Company 6918 Beck Avenue North Hollywood California 818-982-9200

No longer interested email from Kinetic Die Casting Blog?. Please email sales@kineticdc.com to unsubscribe